Skip to main content

Microphone Setup

Microphone setup should be performed during the Initial Experience. But a microphone can be setup at any time for any reason. If you are changing microphones, you will need to perform the Microphone Setup again.

You also may experience an error when changing microphones, when that happens you may see the following and you will need to perform the Microphone Setup process again.

image32.png

Select Microphone Setup from the Control Bar Menu.

image14.png

The Microphone Setup window will appear.

image33.png

Microphone

If you have not installed a microphone at this time, you can connect it now. If you have a microphone installed, you can select it from the drop down menu.

Note

It is strongly recommended to select an M*Modal supported microphone from the Suggested microphone list. We do not recommend using your internal laptop microphone.

Linking with the Mobile Microphone

You can use your iPhone or iPad as a microphone source for M*Modal Fluency Direct. See the Mobile Microphone User Guide for additional details.

Record Button

Select the microphone button or keyboard key that you wish to use to start and stop recording. Click the X to remove the selection.

Calibration

The calibration process is a single screen that will calibrate your microphone to your specific voice and surroundings. You will be prompted to read a paragraph to complete this process.

Microphone calibration will control the volume level of the input source which has a direct effect on recognition quality. This is not the same as the volume slider, which controls the volume level of speakers.

Microphone calibration will stay with your profile, regardless of what computer you are using as long as you are using the same type of microphone. New microphones will require a new calibration.

The calibration process will adjust automatically as you read the paragraph included on the wizard. It will require a minimum of 20 seconds of audio to adjust the gain properly.

image34.png

Once you have finished calibrating the microphone, you can click OK to close this window.